Delivered and installed
We deliver, position, and commission the unit on site, connect the chiller and water care, and set it running. You do not touch a manual.
Cold water that holds its temperature
CryoLink electric plunges chill to 2°C and warm to 42°C, held within half a degree session after session, with no ice runs and no draining between users.
Explore the Range Home or Business ›
Every CryoLink is made to order and installed across the UK and Ireland by our team.
CryoLink H
The horizontal plunge. You lie back, full body, into a shell just 710 mm tall: the experiential, lie-flat format, and the one most homes choose. One electric unit chills and warms the water and holds it within half a degree, from 2°C to 42°C.
- 1950 × 800 × 710mm, horizontal
- 380 Lfull-body immersion
- 2°C to 42°Cheld to ±0.5°C
From £5,995 inc VAT From £500/mo†
Buy Learn more ›
CryoLink V
The upright plunge. Step in and sink to a deeper, seated immersion on a compact 1600 by 800 footprint. Built for clubs and clinics moving a volume of athletes through in a day, and just as at home in a tighter room. The same electric unit, the same half-degree hold.
- 1600 × 800 × 1120mm, upright
- 585 Lseated immersion
- 2°C to 42°Cheld to ±0.5°C
From £7,995 inc VAT From £666/mo†
Buy Learn more ›Inside every CryoLink
One electric unit does the work: it chills, it warms, and it holds the water still and clear between users. No ice, no plumbing, no drain and refill after every session.
Full-spectrum control
A DC-inverter refrigeration circuit takes the water anywhere from 2°C to 42°C and holds your set point within half a degree, all day. Cold plunge and warm soak in one unit, with no ice to run and no pre-chilling.
ClearLoop water care
Continuous circulation, ozone disinfection, and a paper-core filter run on a loop inside the unit, so the water stays clear from one user to the next. It holds up to a week between changes rather than a drain and refill after every session.
The Link app
Set the temperature, schedule sessions, and track usage from your phone or the on-unit panel. WiFi-connected, so the plunge is ready when you are.
IcePoint, optional
The standard build holds 2°C to 42°C. Specify IcePoint at quote and the bottom of the range drops to 0°C, for athletes training their cold tolerance. Same shell, same controls, a larger chiller.
Built to run quietly
An insulated, lockable thermal cover holds the cold while the plunge sits idle, so the inverter idles down and running cost stays around £0.40 per hour at hold.1
CryoLink H or CryoLink V
Two builds, one system. They are genuinely different, and neither is the lesser: choose by the space you have and the way you want to get in.
| Specification | CryoLink H | CryoLink V |
|---|---|---|
| Format | Horizontal, lie-back full body | Vertical, seated and standing |
| Footprint | 1950 × 800 mm | 1600 × 800 mm |
| Height | 710 mm | 1120 mm |
| Water volume | 380 L | 585 L |
| Temperature range | 2°C to 42°C | 2°C to 42°C |
| Hold accuracy | ±0.5°C | ±0.5°C |
| Chiller | 1 HP DC-inverter | 1 HP DC-inverter |
| Water care | ClearLoop: circulation, ozone, filter | ClearLoop: circulation, ozone, filter |
| IcePoint option | To 0°C | To 0°C, 2 HP chiller |
| Best suited to | Homes, spas, hotels | Gyms, clubs, clinics |
| Price | From £5,995 inc VAT | From £7,995 inc VAT |
Both are made for home and commercial use, and both hold 2°C to 42°C to within half a degree with the same water care. If you have the floor length and want to lie flat, choose the H. If the room is tight or the traffic is high, choose the V.
What your room needs
A CryoLink needs a level floor, a standard socket, and a way to drain. We confirm every detail with you in writing before anything is built.
Floor and clearance
A level floor rated to at least 544 kg filled. Leave about 16 in at the component end and 12 in on the drainage side for servicing. Above ground level, have the floor loading checked first.
Power and water
Runs from a standard socket. Fill once from a garden hose or tap, about 40 minutes to full; from a fresh fill it reaches below 4°C in roughly 6 hours, then holds.
Drainage and service
A built-in base drain takes a hose when it is time to empty. Removable vents make servicing straightforward, and the thermal cover locks the cold in between sessions.
Delivered and commissioned
We deliver, position, and commission the unit on site, then walk you through the app and the day-to-day. One point of contact from quote to running.
What it is like to live with
Fill it once and it stays ready. The day-to-day is closer to a fridge than a pool: set it, cover it, and swap a filter now and then.
Fill once
About 40 minutes to full from a hose or tap, then below 4°C in roughly 6 hours. After that it holds your set point, so there is no pre-chilling before a session.
A week between changes
With ClearLoop running, the water holds up to a week between changes rather than a drain and refill after every use. Two paper-core filters are included; swap them weekly, and rinse to extend their life.
Running cost
Around £0.40 per hour at hold.1 The inverter ramps down once the set point is reached, and the insulated cover keeps the cold in, so the unit idles efficiently between uses.
Draining and moving
A built-in base drain empties it to a hose in minutes. Removable vents open the unit for service without specialist tools.
Why buy your CryoLink from PROTEC Recovery
Not a box on a pallet. Delivered, installed, and set running by the team behind it, then supported for the life of the unit.
Complete on arrival
Every unit ships complete, with its plant, controls, and water or air care. Nothing to source, nothing to bolt on later.
Finance and leasing
Spread the cost as a monthly payment or a lease, for a home or for a business, arranged before anything is built.
Supported across the UK and Ireland
One point of contact from order to install, with servicing, parts, and advice for the life of the unit.
Warranty and service, from the people who fit it
Every CryoLink is backed and supported directly by us, not routed through a third party. If something needs attention, one call reaches the team that installed it.
Covered from the day it runs
A manufacturer warranty on the chiller and unit, confirmed in writing with your order. Parts and servicing are held across the UK and Ireland, so support is close.
Support and Servicing ›One point of contact
The same team takes you from quote to install to the years after. No ticket queues and no reseller in the middle, for a home or across a commercial floor.
Talk to the Team ›Questions people ask before they buy
Does it only do cold?
No. A CryoLink chills to 2°C and warms to 42°C, and holds whatever you set within half a degree. It is a cold plunge and a warm soak in one electric unit, so contrast work is a matter of changing the set point.
How is the water kept clear between users?
The water runs on a loop inside the unit: continuous circulation, ozone disinfection, and a paper-core filter. It stays clear from one user to the next without a drain and refill after every session, and holds up to a week between changes. A thermal cover holds the cold while it sits idle.
What does the floor need to take?
A level floor rated to at least 544 kg filled. Leave about 16 in of clearance at the component end and 12 in on the drainage side so the unit can be serviced and drained. Above ground level, have the floor loading checked before install.
What is it like to run day to day?
You fill it once from a hose or tap, about 40 minutes to full, and from a fresh fill it reaches below 4°C in roughly 6 hours. After that it stays set. Two paper-core filters are included: swap them weekly and rinse to extend their life. A built-in base drain empties it to a hose when needed.
Can it make ice?
Yes, as the IcePoint option specified at quote. The standard build holds 2°C to 42°C; IcePoint takes the bottom of the range to 0°C for athletes training their cold tolerance. Zero is as low as it goes. Both builds share the same shell, chiller family, and controls.
Does it have massage jets?
No. The jets circulate and clean the water; they are not there to massage you. A CryoLink is a cold plunge: still, clear water, held at the temperature you set.
Should I choose the H or the V?
The H is the horizontal, lie-back format in a longer, lower shell, and for most homes it is the natural choice. The V takes a smaller footprint and a deeper, seated immersion, which suits clubs and clinics moving a volume of people through in a day. Both hold 2°C to 42°C to within half a degree with the same water care.
How do I order, and what happens next?
Each CryoLink is made to order. Request a quote with your site details and we confirm the build, the delivery, and the installation in writing before anything is ordered. We deliver and commission the unit on site, and finance routes are available for a home, a gym, a clinic, or a spa.
For home, or for business
The same builds, specified two ways. Tell us where it is going and we size it, deliver it, and commission it.
A daily session, in your own space
The CryoLink brings cold and warm immersion home with no ice runs and no draining between sessions. We deliver, install, and walk you through it.
Request a Quote See It as a Monthly Cost ›A recovery line that earns its floor space
Electric plunges for gyms and hotel spas, sized to your throughput and built to run all day. One point of contact takes you from quote to install, with finance and leasing on every build.
Plan a Suite Finance and Leasing ›One room, planned end to end
Pair cold water with a chamber, light, and pressure as a single fitted suite. Tell us the space and the throughput, and we lay it out before anything ships.
Start Planning How to choose a cold plunge ›- Temperatures and running-cost figures are nominal and depend on model, ambient conditions, and installation. CryoLink is positioned for recovery, performance, and wellness, and is not a substitute for professional health advice. Full specifications are provided per unit before order.