AtmosChamber Solo Overview Highlights TrueHold Models Specs From £32,400.00inc VATRequest a Quote

AtmosChamber Solo

Step in, seal, and breathe.

A single-person hard-shell hyperbaric oxygen chamber, adjustable from 1.3 to 2.0 ATA.

AtmosChamber Solo hyperbaric oxygen therapy product shot

£32,400.00inc VAT

From £2,700 per month with finance.†

Made to order. Request a quote and we confirm the build, delivery, and installation.

Request a Quote £32,400.00inc VATSee the highlights ›

What makes it AtmosChamber

TrueHold AtmosHull

Two ideas do the work.

Lie back, private.

Oxygen made on board.

Delivered and commissioned.

TrueHold

Set the pressure. Keep the pressure

Set 2.0 ATA

Relief valves hold itautomatic, always on

The whole session long

TrueHold

TrueHold, chamber pressure held at the set ATA by automatic relief valves. The chamber climbs to the pressure you set, then the valves bleed off anything above it for as long as the hold runs.1 The number you set is the number you get.

Oxygen

The chamber makes its own oxygen

93%

oxygen purity, ±3

10 LPM

from the on-board concentrator

An on-board concentrator separates oxygen from room air while the session runs, with air delivery up to 110 LPM behind it. There is no cylinder to store, refill, or reorder.

AtmosHull

A composite pressure vessel

AtmosHull, the hard pressure shell: here high-strength composite, finished matte black, with an 830 x 680 mm entry hatch. It runs all day at 60 dB or under.

Triple-Relief

Three ways out for pressure

Triple-Relief is the pressure safety, in three independent stages.

AutomaticTwo automatic pressure-relief valves
ManualA screw-type valve, opened by hand
EmergencyA push-type emergency release
On the chamberPressure gauge and intercom

The AtmosChamber range

Which AtmosChamber

Two portable soft-shell builds, three hard-shell builds that hold more pressure. Pick by the room and the people.

up to1.5ATA

AtmosChamber Air Solo

ShellSoft-shell Capacity1 person, lying Oxygen10 LPMFrom£7,999.003
See Air Solo ›

up to1.5ATA

AtmosChamber Air Sit

ShellSoft-shell Capacity1 person, sitting Oxygen93%, 10 LPMFrom£8,394.003
See Air Sit ›

up to2.0ATA

AtmosChamber Solo

ShellHard-shell Capacity1 person, lying Oxygen93%, 10 LPMFrom£32,400.003
You are viewing this one

up to2.0ATA

AtmosChamber Solo Pro

ShellHard-shell Capacity1 person, seat or bed Oxygen93%, 10 LPM x2From£39,995.003
See Solo Pro ›

up to2.0ATA

AtmosChamber Duo

ShellHard-shell Capacity2 people, seated OxygenBIBS, 0 to 20 LPM eachFrom£75,000.003
See Duo ›

Oxygen figures are purity and flow per model. Prices include VAT.

2310 mm long 910 mm 910 mm deep

Dimensions and install

What it needs

Chamber2310 x 910 x 910 mm outer
Inside2250 x 850 x 850 mm
Weight275 kg, no special floor loading
AccessPlan a 1 m clear opening on the route
Power220 to 240 V, 50 Hz, 16 A dedicated circuit
Running draw2.0 kW; heat sized into the room’s HVAC
ClimateWater-cooled air conditioning on board
DutyAll day, 20 minutes between sessions
VentilationDoor opened to vent after a session

AtmosChamber Solo is a recovery and wellness chamber; it is not a medical device. Installation figures are confirmed against your site before delivery.

Specifications

The essentials

Every figure here is an Solo figure.1 The pressure is the specification.

2.0 ATA

93% oxygen

10 LPM

275 kg

2.0 kW

Next to renting sessions

What changes when the chamber is yours.

AtmosChamber Solo Pay-per-session chambers
WhereOn your siteAt a venue you book
SessionsAs many as you runPaid one at a time
ScheduleYoursOpening hours
TravelNoneThere and back, every session
Running costElectricity2A fee every session

Descriptions reflect pay-per-session chamber offerings generally, not any single provider.

AtmosChamber Solo

Tech specs

Working pressure1.3 / 1.5 / 1.7 / 2.0 ATA, adjustable
Relief2x automatic, screw-type manual, push-type emergency
Cabin atmospherePressurised air, oxygen held below 25%
Pressure vesselPED 2014/68/EU type-examined, EN 13445

Ordering

From order to first session

BuildMade to order
Delivery and commissioningPlanned with you before we build
HandoverOperator training and English manuals
  1. 1Tell us where it is going: a gym, a hotel spa, a clinic, or a home, and which floor you want.
  2. 2We confirm the specification, the site needs, and the price in writing.
  3. 3We deliver, commission on site, and hand it over running.

AtmosChamber Solo

Questions

A footprint of about 2.3 by 0.9 m plus its plant, on a normal floor. We confirm access and siting against your site at survey.

Order one, or fit out a facility

Each build is made to order. Request a quote for a gym, a hotel spa, a clinic, or a home, and we confirm the specification, the site requirements, and a finance route.3

From £2,700 per month with finance.†

Request a Quote ›See it as a monthly cost ›
  1. Pressure, flow, and session figures are from the manufacturer documentation and are nominal. The working specification for your unit is confirmed in writing before order.
  2. Running cost is a derived electricity figure at typical settings and varies with your tariff, ambient conditions, and use.
  3. Prices are the starting point for the base build and exclude delivery, site survey where applicable, and installation. Final price and any finance terms are confirmed in writing before order. All prices include VAT.