CryoLink V
The upright plunge, held to the degree.
The upright CryoLink. A compact footprint holds 585 L, so you step in and sink to a deeper, seated immersion, standing for the legs or hunkered down for the whole body. It suits a tighter room, and it is built for clubs and sporting organisations moving a volume of athletes through in a day. One electric unit chills and warms the water and holds it within half a degree of the temperature you set, from 2°C to 42°C. Built to a premium standard, considered in the detail, and simple to run.

Picked up where you left off.
Add additional filters Keep the water running clear.
Comfort A couple of finishing touches.
Add a step-in basin
Add a neck pillow
Your CryoLink V. Everything look good?
Need a moment? Save your build and pick it up next time, no account needed.
What makes it CryoLink
Two ideas do the work.
Step in, upright.
Chills and heats.
Clear water, kept clear.
TrueHold
The number you set is the number you get.
Set 4°C and it is 4°C. TrueHold holds the whole tub within half a degree of whatever you pick, from 2°C to 42°C, hour after hour. No warm patches. No drift as the afternoon warms up. The same cold shock, every session.
DualClimate
One unit does both.
2°C
the coldest it holds, for a cold plunge
42°C
the warmest it holds, for a warm soak
The same electric unit chills the water down and warms it back up, so one tub is both a cold plunge and a warm soak. Cooling runs at 3210 W and heating at 4150 W, both from a sealed refrigeration circuit with no ice to buy. Set anything from 2°C to 42°C and it stays there. Or add IcePoint, the ice-making option, and the bottom of that range drops to 0°C: a real cold for athletes training their tolerance.
ClearLoop
Clear water, kept that way.
ClearLoop runs the water through continuous circulation, ozone disinfection, and a paper-core filter. The water stays clear for up to a week between changes, not a drain and refill after every session. The jets work underneath it all, circulating and cleaning; the water you get into is still, clear, and exactly as cold as you asked for. An insulated, lockable cover keeps the chill in and the running costs down.
Owning one
A week of clear water.
The water is always moving. Every return passes the spout first, where 1 mm holes catch hair and grit before anything reaches the pump. From there it runs through a paper-core cartridge that filters down to 20 microns, and past an ozone dose you time yourself from the touchscreen. The loop runs whether you plunge or not, so the water is being cleaned in the hours between sessions, not only during them.
That is why a fill lasts. With ClearLoop running the water stays clear for up to a week between changes rather than a day or two, and how often you change it is yours to judge. Two cartridges come in the box for a reason: one runs in the plunge while the other dries. The habit is simple, swap weekly, rinse the used cartridge and let it dry, then rotate it back in next time.
Filling is a garden hose and about 40 minutes. Once it is full, let it rest 20 minutes before you switch on so the coolant settles, then set your temperature and leave it. The drain is built into the base and takes a hose, so old water goes straight to a gully, and the vents lift off by hand when the unit needs a look.
One piece of cold-weather care. If the plunge is left unheated and below 0°C for twelve hours, drain the tub, the filter and the chiller so nothing can freeze inside them. Everything else is set once and left to run.
In the box
The plunge, and everything to run it
Drain connector
Screws to the base drain and takes a garden hose to a gully.
Thermal cover
Insulated and lockable, it holds the cold and keeps running costs down.
Two filter cartridges
Paper-core, 20-micron. One runs while the other dries, so you always have a spare.
Quick-start guide
Fill, rest, set the temperature, and you are running.
Controls and Underglow
Run it from the touchscreen. Lit from beneath.
A full touchscreen on the unit runs it day to day, in multiple languages. Temperature, ozone timing, the on and off schedule, and a switch between °C and °F: all of it is set from the one panel. The touchscreen is the daily driver. It watches itself, too. If something is wrong, the home screen names the fault and walks you through the steps to clear it, so a problem reads as plain words rather than a blinking light. It is WiFi-connected and ready for the Link app, which is in development and on the way. Underglow puts a coloured light beneath the water, yours to set.
Dimensions and install
What it needs
Specifications
The essentials
Real figures, stated plainly. What you set is what it holds.
585 L
2°C to 42°C
±0.5°C
1.0 HP
Thermal cover
Next to an ice bath
What changes when the cold runs itself.
Descriptions reflect common ice baths and DIY conversions, not any single product.
CryoLink V
Tech specs
Ordering
From order to first plunge
- 1Tell us where it is going: a home, a gym, a clinic, or a spa.
- 2We confirm the build, the site needs, and the price in writing.
- 3We deliver, commission on site, and hand it over running.
Which CryoLink
Two formats, the same TrueHold hold. Pick by the room and the body position.
Vertical
CryoLink V
Upright and compact, built to move a club’s volume of players through a day.
You are viewing this one
CryoLink V
Questions
Order one, or fit out a facility
Each build is made to order. Request a quote for a home, a gym, a clinic, or a spa, and we confirm the specification, the site requirements, and a finance route.1
From £666 per month with finance.†
Buy NowFinance options ›- Prices are the starting point for the base build and exclude delivery, site survey, and installation. Final price and any finance terms depend on the build, finish, and site, and are confirmed in writing before order.
- Water is inverter-chilled and held within half a degree of the set point across a 2°C to 42°C range; the ice-making option reaches 0°C. Running cost is typical at hold and varies with ambient conditions, room ventilation, and use. Figures are nominal and confirmed per unit before order.
- Dimensions and installation figures are from the manufacturer documentation and the unit rating plate; internal figures are measured at the bathing well. Floor rating, clearances, and the electrical supply are confirmed against the site at survey before delivery.


